TM-5-2815-241-34-P

ENGINE, DIESEL NTC-290

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT, MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

MARCH 1987

TM-5-2815-241-34-P - Page 285 of 738

TM 5-2815-241-34&P

CAM FOLLOWER ASSEMBLY - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

22.

Two new

cup plugs (11)

23.

Two dummy screws

(10) and two lock-

screws (12)

Using arbor press and ST-1053 plug driving

mandrel, press in until flush with end of cam

follower housing (7) or 0.010 inch (0.25

mm) below edge of hole.

a. Using 1/4-inch flat-tip screwdriver,

remove two dummy screws.

b. Using 1/4-inch flat-tip screwdriver,

install and tighten two lock screws.

NOTE

FOLLOW-ON MAINTENANCE:

Install cam follower housing (page 2-70).

TASK ENDS HERE

2-263