TM-5-2815-241-34-P

ENGINE, DIESEL NTC-290

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT, MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

MARCH 1987

TM-5-2815-241-34-P - Page 315 of 738

TM 5-2815-241-34&P

FUEL PUMP - CONTINUED

LOCATION

ACTION

ITEM

REMARKS

7.

Front cover (23),

screw (24), six

screws (27), seven

lockwashers (25),

seven flat washers

(26), and gasket (28)

8.

9.

Throttle lever (29),

throttle lever screw

(30), flat washer (31),

two lockwashers

(32), and nut (33)

Snapring (34),

throttle shaft cover

(35), snapring (36),

and throttle shaft

assembly (37)

a.

b.

Using 5/32-inch hex key, unscrew and

remove screw (24), lockwasher, and

flat washer.

Using 7/16-inch box-end wrench, un-

screw and remove six screws (27),

lockwashers, and flat washers.

c.

d.

Discard lockwashers.

Using plastic-faced hammer, tap cover

and seal to loosen.

Take off cover and seal and gasket.

Discard gasket.

a.

Using two 7/16-inch open-end

wrenches, loosen, unscrew, and take

off nut.

b.

Take off lockwashers and flat washer.

Discard lockwashers.

Take out throttle lever screw.

Remove throttle lever.

c.

d.

a.

b.

c.

d.

Using 6-inch slip-joint pliers, take out

snapring (34).

Remove throttle shaft cover.

Using snapring pliers, take out

snapring (36).

Pull out throttle shaft assembly.

Handle throttle shaft carefully.

TA 242533

2-293