TM-5-2815-241-34-P
ENGINE, DIESEL NTC-290
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT, MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
MARCH 1987
TM-5-2815-241-34-P - Page 463 of 738
TM 5-2815-241-34&P
SECTION IX, CAMSHAFT AND TIMING SYSTEM – CONTINUED
PART OR LOCATION
MINIMUM
MAXIMUM
Cam Follower Capscrews
30 (41)
35 (47)
SECTION X, ENGINE LUBRICATION SYSTEM
WEAR LIMITS – INCH (MM)
PART OR LOCATION
Single Lubricating Oil Pump
(Double Capacity)
Bushing Inside Diameter
Drive Shaft
Outside Diameter
Idler Shaft
Outside Diameter
Drive Gear to Body
Drive Shaft End Play
Idler Shaft
Protrusion Above Body to Cover Face
Driven Gear and Driving Gear Shaft
Protrusion
Piston Cooling Nozzle Tube
Protrusion Above Body Mounting Face
NEW
MINIMUM
0.8767
(22.268)
0.8745
(22.212)
0.8745
(22.212)
0.002
(0.05)
1.035
(26.29)
2.970
(75.44)
NEW
MAXIMUM
0.8777
0.879
(22.293)
(22.33)
0.875
(22.22)
0.875
(22.22)
0.008
(0.020)
0.955
(24.26)
1.055
(26.80)
3.000
76.20)
WORN
LIMIT
0.873
(22.17)
0.873
(22.17)
0.012
(0.30)
TORQUE LIMITS – FT LB (N•M)
PART OR LOCATION
Oil Pump Mounting Capscrew
Piston Cooling Nozzle Capscrew
MINIMUM
MAXIMUM
35 (47)
45 (61)
16 (22)
21 (28)
2-441
Back to Top
