TM-5-3805-254-14-P-1
TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW, IHC MODEL F-5070 (CCE)
TECHNICAL MANUAL; OPERATOR'S, ORGANIZATIONAL, DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS INFORMATION AND SUPPLEMENTAL MAINTENANCE INSTRUCTIONS)
AUGUST 1980
TM-5-3805-254-14-P-1 - Page 75 of 590
(4)
The operator of the vehicle conducts the operation of the dump body and tailgate from within the cab.
c.
Dimensions.
The dimensions of the Dump Truck are as follows:
Overall length
319 inches
Overall width
101 inches
Overall Height
125 inches
Wheelbase
184 inches
Bumper to back of cab
114 inches
Cab to axle
120 inches
Interior size of cab
69 inches X 57 inches
Axleweight
Front:
12,700 lb.; Rear:
18,300 lb
(5)
Operational and maintenance procedures are covered in the manufacturer's manuals overpacked with the
equipment.
The category of maintenance for the dump truck will be in accordance with Maintenance Allocation Chart
(MAC).
(See Appendix 2-B of the SOMARPI) Refer to paragraph 2-10 of this SOMARPI for requisitioning of repair parts
and support.
The intended uses are as follows:
(a)
Intended Use.
The dump truck is primarily intended for use in transporting materials for the construction/rehabilitation of roads,
airfields, ports, beach and marine POL facilities world-wide.
It is capable of providing rapid transport of capacity payloads
in mud, sand, snow and off-road terrain, with and without payload, up to the limit of traction.
The equipment that may be
serviced by the dump truck are:
Concrete Pavers
Asphalt Spreaders
Chip Spreaders
Rock Crushers
Conveyers
Storage Bins
Asphalt Pug Mills
Motorized Bucket Loaders, 2-1/2 thru 6 cubic yard sizes
Powered excavators up to 2 cubic yard size
2-3.
SUPPORTING DATA
See Appendix 2-A.
9
Back to Top
