TM-5-3805-254-14-P-1
TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW, IHC MODEL F-5070 (CCE)
TECHNICAL MANUAL; OPERATOR'S, ORGANIZATIONAL, DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS INFORMATION AND SUPPLEMENTAL MAINTENANCE INSTRUCTIONS)
AUGUST 1980
TM-5-3805-254-14-P-1 - Page 8 of 590
For assistance in understanding your vehicle
weight
carrying
capability,
consult
your
local
International Harvester dealer or branch.
SPECIFICATIONS
ENGINE
NTC-290
Cylinders
6
Bore & Stroke
5-1/2 x 6 Inches
Piston Displacement (Cu.
In.)
855
Horsepower
290 @ 2100 RPM
Firing Order
1-5-3-6-2-4
ELECTRICAL
Electrical System, 12 Volt
Negative Ground
TO THE OPERATOR
The purpose of this manual is to familiarize you
with the controls of your vehicle and to provide sufficient
information to enable you to perform minor routine
services necessary for continued efficient operation.
To
protect your equipment, study this manual before you
start to operate the vehicle.
When you need parts, always give the unit code
number, vehicle model and chassis serial number, and
the serial number of the unit for which the parts are
required.
We suggest that you write these serial
numbers in the spaces provided so that you have them
at hand when parts are required.
Request the salesman
to assist you in obtaining these serial numbers when the
vehicle is delivered to you.
VEHICLE MODEL
(Stamped on plate cab door inner panel, left
side.)
ENGINE SERIAL NUMBER
(Cummins engines stamped on plate, left side of
gear case, front of engine.)
FRONT AXLE NUMBER
(From specification card)
If you need major information not given in this
manual, or if you require services of a trained
serviceman, we urge you to use the extensive facilities
offered by IH dealers and branches in your locality.
IH
dealers and branches keep abreast of the best methods
of servicing IH equipment, and have up-to-date facilities
for providing prompt, first-class service.
They carry
ample stocks of essential International service parts.
NOTE:
For Cummins Engines refer to their
Engine Operator's Manual for detailed Diesel Engine
information.
CHASSIS SERIAL NUMBER
(Stamped on frame left side rail, front)
TRANSMISSION NUMBER
(From specification cards.)
REAR AXLE NUMBER
(From specification card.)
2
Back to Top
