TM-5-3805-254-14-P-2
TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW, IHC MODEL F-5070 (CCE)
TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, GENERAL SUPPORT AND DEPT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS INFORMATION AND SUPPLEMENTAL MAINTENANCE INSTRUCTIONS)
JUNE 1980
TM-5-3805-254-14-P-2 - Page 805 of 894
TRANSMISSION
TRUCK SERVICE MANUAL
WEAR LIMITS AND SPRING DATA
Para 8-4
Wear Limit
Illustration
Description
Part No
Inch
(mm)
B, foldout 14
FIRST CLUTCH
1
External-tanged clutch plate:
6834680
Thickness
0.0993
(2.52)
Cone
0.013
(0.33)
External-tanged clutch plate:
6834766
Thickness
0.1161
(2.95)
Cone
0.013
(0.33)
*2
Internal-splined clutch plate - thickness
6835748
0.1347
(3.42)
A, foldout 15
LOW CLUTCH PLATES
*15
Internal-splined clutch plate -thickness
6835748
0.1347
(3.42)
*15
Internal-splined clutch plate -thickness
6834487
0.1347
(3.42)
16
External-tanged clutch plate:
6834680
Thickness
0.0993
(2.52)
Cone
0.013
(0.33)
16
External-tanged clutch plate:
6834766
Thickness
0.1161
(2.95)
Cone
0.013
(0.33)
Low clutch running clearance (refer to
para 7-4)
A, foldout 16
REAR COVER, OUTPUT SHAFT AND GOVERNOR
8
Rear cover - clearance of governor
6835689
0.004
(0.10)
bore to governor
6836769
22,
Output shaft bushing - clearance on main
shaft
34 (A, foldout
13),
8623075
0.004
(0.10)
or 6836272
*Minimum depth of oil grooves - 0.008 inch (0.20 mm).
796
Back to Top
