TM 5-3805-254-20-1
ORGANIZATIONAL TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
e.
If 8 wire (1) is not loose, corroded, frayed, or broken, go to step 5.
Step 5.
Set multimeter to ohms scale and adjust to 0 ohms.
Connect red test lead to circuit breaker terminal feed
stud (2) and black test lead to terminal (5) on secondary magnetic switch (6).
Check for 0 ohms on
multimeter.
Disconnect test leads.
a.
If multimeter reads no continuity, 8 wire (1) must be replaced.
Notify Direct Support
Maintenance.
b.
If multimeter reads 0 ohms, connect batteries (page 2-424) and go to step 6.
2-171