TM-5-3805-254-20-1

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW, IHC MODEL F-5070 (CCE)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL VOLUME 1 OF 2

JANUARY 1988

TM-5-3805-254-20-1 - Page 383 of 790

TM 5-3805-254-20-1

ORGANIZATIONAL TROUBLESHOOTING - CONTINUED

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

Step 4.

Check 62J wire (11) on junction box (12) as follows:

Using 9/16-inch open-end wrench, unscrew

and take off air line fitting (13).

Using number two cross-tip screwdriver, unscrew and take out six

screws (14) and six flat washers (15).

Take off lower rear molding (16).

Check 62J wire (11) for

loose or frayed condition.

a.

If 62J wire (11) is loose, tighten nut (17) using 3/8-inch open-end wrench.

Put lower

rear molding (16) in place.

Screw in and tighten six screws (14) and six flat washers

(15) using number two cross-tip screwdriver.

Screw on and tighten air line fitting (13)

using 9/16inch open-end wrench.

b.

If 62J wire (11) is frayed, it must be replaced.

Notify Direct Support Maintenance.

2-313