TM-5-3805-254-20-1

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW, IHC MODEL F-5070 (CCE)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL VOLUME 1 OF 2

JANUARY 1988

TM-5-3805-254-20-1 - Page 639 of 790

TM 5-3805-254-20-1

ACCELERATOR CONTROL ROD - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

18.

New lockwasher (5)

Screw on and tighten using 7/16-inch and

and nut (6)

1/2-inch open-end wrenches.

NOTE

Throttle lever and accelerator control rod must aline to reach maximum engine

rpm.

19.

Throttle lever (7)

Accelerator control

a.

Put machine bolt in accelerator control

rod (1) and machine

rod.

bolt (8)

b.

Push throttle lever toward rear of truck

and hold in position.

c.

Aline threaded end of machine bolt with

hole in throttle lever and put in.

If threaded end of machine bolt and

hole in throttle lever do not aline go to

step 20.

If threaded end of machine bolt and

hole in throttle lever aline go to

step 22.

2-555