TM-5-3805-254-20-1

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW, IHC MODEL F-5070 (CCE)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL VOLUME 1 OF 2

JANUARY 1988

TM-5-3805-254-20-1 - Page 656 of 790

TM 5-3805-254-20-1

ACCELERATOR CONTROL PIVOT ARM - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

INSTALLATION

12.

Engine cover

Pivot arm assembly

a.

Put pivot arm assembly in place.

side panel (1)

(2), two screws (3),

b.

Screw on and tighten using 7/16-inch,

two new lockwashers

1/2-inch drive socket, ratchet handle,

(4), and two nuts (5)

and 7/16-inch open-end wrench.

13

.

Pedal bracket (6)

Control pedal (7)

a.

Put control pedal in place.

and clevis pin (8)

b.

Put in clevis pin using 6-inch slip-joint

pliers.

NOTE

For more information on cotter pins, go to General Maintenance Instructions

(page 2-424).

14.

Flat washer (9) and

a.

Put on flat washer.

new cotter pin (10)

b.

Put in cotter pin and bend back ends

using 6-inch diagonal-cutting pliers.

NOTE

Flat sides of pivot arm assembly must aline with slot on lever assembly.

2-572