TM 5-3805-254-20-1
RADIATOR INLET HOSE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
12.
Inlet (1)
New gasket (2)
Put in place using silicone sealer.
13.
Radiator (3)
Inlet (1)
Put in place.
14.
Inlet (1)
Two screws (4), two
Screw in and tighten using 9/16-inch, box-
flat washers (5),
end wrench.
and two new
lockwashers (6)
15.
Inlet (1) and
Hose (8) and two
Put in place.
elbow (7)
clamps (9)
16.
Thermostat housing
Hose (11) and two
Put in place.
(10) and elbow (7)
clamps (12)
17.
Hoses (8 and 11)
Clamps (9 and 12)
Tighten using 114-inch flat-tip screwdriver.
NOTE
FOLLOW-ON MAINTENANCE:.
1.
Fill cooling system (page 2-628).
2.
Close right side hood panel (page 2-424).
TASK ENDS HERE
2-646