TM-5-3805-254-20-2
TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW, IHC MODEL F-5070 (CCE)
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL VOLUME 2 OF 2
JANUARY 1988
TM-5-3805-254-20-2 - Page 173 of 971
TM 5-3805-254-20-2
BATTERY POSITIVE-TO-NEGATIVE CONNECTOR CABLE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSPECTION/REPLACEMENT
NOTE
Replace all damaged or defective parts.
For more information on how to inspect parts, go to General Maintenance Instructions
(page 2-424).
Steps given are typical for both battery positive-to-negative connector cables.
12.
Cable (1)
Look for corroded ends or worn cable
covering.
13.
Two terminals
Look for cracks, breaks or corroded mating
(2 and 3)
surfaces.
14.
All threaded parts
Look for damaged threads or rounded
heads.
ASSEMBLY
NOTE
Steps given are typical for both positive-to-negative connector cables.
15.
Cable (1)
Two terminals (2
Screw in and tighten using two 9/16-inch
and 3), two screws
open-end wrenches.
(4), and two
nuts (5)
16.
Two terminals
Two screws (6)
Screw in two turns using two 1/2-inch open-
(2 and 3)
and two nuts (7)
end wrenches.
Do not tighten.
INSTALLATION
NOTE
Steps given are typical for both positive-to-negative connector cables.
17.
Post (8)
Cable (1) and
Put on.
terminal (2)
2-822
Back to Top
