TM-5-3805-254-20-2

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW, IHC MODEL F-5070 (CCE)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL VOLUME 2 OF 2

JANUARY 1988

TM-5-3805-254-20-2 - Page 213 of 971

TM 5-3805-254-20-2

RIGHT INSTRUMENT PANEL OPTICAL RIBBON - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

INSTALLATION

NOTE

Steps given are typical for the installation of four identification tabs into four bezels.

When installing optical ribbon be sure to start at end farthest away from optical light assembly.

5. Rear of instrument

Bezel (2) and iden-

a. Put in place.

panel (1)

tification tab (3)

b. Push identification tab into bezel.

c. Repeat step b until all identification tabs

are installed in bezels.

6. Optical light

Optical ribbon (5)

Push in.

assembly (4)

7. Lower center instru-

Two screws (7) and

a. Put bracket in place.

ment panel (6)

bracket (8)

b. Screw in and tighten using number one

cross-tip screwdriver.

TA244245

2-862