TM-5-3805-254-20-2

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW, IHC MODEL F-5070 (CCE)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL VOLUME 2 OF 2

JANUARY 1988

TM-5-3805-254-20-2 - Page 322 of 971

TM 5-3805-254-20-2

REAR BRAKES - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

REMOVAL

WARNING

Parts of the service brake assembly will be coated with asbestos dust

Breathing

this

dust

may

be

hazardous to your health Use a filter mask approved for use against asbestos dust Never use compressed air

or dry brush to clean these assemblies Dust shall be removed using an industrial-type vacuum cleaner with a

high-efficiency filter system.

NOTE

Steps given are typical for right and left front rear and rear rear brakes.

1

Brake assembly (1)

Using industrial-type vacuum, clean off

asbestos dust.

2

Slack adjuster (2)

Adjusting screw

Using 9/16-inch box-end wrench, push in

(3) and locking

on locking sleeve and turn until brake cam-

sleeve (4)

shaft S-head (5) is horizontal and slack

adjuster is loose.

3

Upper dust

Three screws(7)

a Using 9/16-inch box-end wrench, un-

shield (6)

screw and take out.

b Get rid of.

4

Upper dust

Take off.

shield (6)

2-956