TM-5-3805-254-20-2

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW, IHC MODEL F-5070 (CCE)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL VOLUME 2 OF 2

JANUARY 1988

TM-5-3805-254-20-2 - Page 385 of 971

TM 5-3805-254-20-2

AIR DRYER CARTRIDGE - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

ASSEMBLY

CAUTION

Position new cartridge with cartridge locknut facing up to prevent beads from spilling.

25. Plate (3)

New ball check

a.

Drop in ball check valve.

valve (8) and

b.

Put retaining clip in position.

clip (9)

26.

Screw (10) and new

Screw in and tighten using number two

lockwasher (11)

cross-tip screwdriver.

27.

Two new rings (12)

a.

Coat with lubricating oil.

b.

Put into ring grooves (4).

28. New cartridge (13)

Spring (5) and

Put in.

washer (14)

Position large diameter of spring

facing down.

NOTE

Hold cartridge screw from being pushed out when performing next step.

29.

Plate (3)

Put on.

30. Cartridge screw (15)

New cartridge

Screw on and tighten using 3/4-inch 112-

locknut (16)

inch drive deep socket, ratchet handle, and

11/16-inch box-end wrench.

TA244347

2-1019