TM-5-3805-254-20-2
TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW, IHC MODEL F-5070 (CCE)
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL VOLUME 2 OF 2
JANUARY 1988
TM-5-3805-254-20-2 - Page 560 of 971
TM 5-3805-254-20-2
FRONT BRAKE LIMITING CONTROL VALVE HOSES AND FITTINGS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
CAUTION
Antiseizing tape must be used on all pipe threads to provide a good seal and to prevent threaded parts from seizing.
NOTE
For more information on how to use antiseizing tape, go to General Maintenance Instructions (page 2-424).
See tags for correct location of airhoses.
Assistance will be needed when performing step 19.
19
Engine side of
Anchor coupling (3),
a Put anchor coupling in position.
firewall (1) and
two new lockwashers
b Screw in and tighten using 1 118-inch
driver’s side of
(4), and nut (5)
and 1-inch open-end wrenches.
firewall (2)
20
Engine side of
90-degree elbow (6)
a Wrap pipe threads with antiseizing tape.
firewall (1)
b Screw in and tighten using 1/2-inch
open-end wrench.
Position to face up.
21
Driver’s side of
Fitting (7)
a Wrap pipe threads with antiseizing tape.
firewall (2)
b Screw in and tighten using 7116-inch
box-end wrench.
22
Engine side of
90-degree elbow (6)
Wrap pipe threads with antiseizing tape.
firewall (1)
23
90-degree elbow (6)
Airhose (8)
Screw on and tighten using 9116-inch open-
end wrench.
24
Front brake limit-
90-degree elbow (10)
Wrap pipe threads with antiseizing tape.
ing and quick re-
lease valve (9)
25
90-degree elbow
a Screw on and tighten using 9116-inch
(10) and airhose (8)
open-end wrench.
b Take off tag.
c Get rid of tag.
26
Airhose (8)
Two clamps (11)
Put on.
Change 1
2-1164
Back to Top
