TM-5-3805-254-20-2

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW, IHC MODEL F-5070 (CCE)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL VOLUME 2 OF 2

JANUARY 1988

TM-5-3805-254-20-2 - Page 665 of 971

TM 5-3805-254-20-2

DRIVER’S SEAT COVERS AND PAN

This task covers:

a.

Removal (page 2-1275)

b.

Installation (page 2-1275)

INITIAL SETUP

Tools

Equipment Condition

Screwdriver, flat-tip, 1/4-inch

Left cab door opened (page 2-424)

Wrench, box-end, 7/16-inch

ACTION

LOCATION

ITEM

REMARKS

NOTE

Steps given are typical for seat and back cushion covers.

REMOVAL

1.

Cushion pan (1)

Eight clips (2),

a.

Using 1/4-inch flat-tip screwdriver, pry clips

cushion (3), and

away from cushion.

cover (4)

b.

Take cushion off cushion pan.

c.

Pull cover off cushion.

2.

Driver’s seat (5)

Four screws (6)

Take off.

and cushion pan (1)

TA702183

Change 1

2-1275