TM 5-3805-254-20-2
Section XX.
HYDRAULIC AND FLUID SYSTEM MAINTENANCE
Page
Page
Dump Body Control Lever and.
..................
Reservoir-To-Pump Suction Hose
Linkage .
...............................................
2-1367
and Fittings.
......................................
2-1390
Hydraulic Filter and Housing .
.....................
2-1362
Valve-To-Cylinder Pressure
Hydraulic Oil Reservoir.
..............................
2-1375
Hoses and Fittings .
....................................
2-1400
Pump-To-Valve Pressure Hose and.
..........
Valve-To-Reservoir Return
Fittings .
................................................
2-1385
Hose and Fittings.
.............................
2-1395
HYDRAULIC FILTER AND HOUSING
This task covers:
a
Removal (page 2-1362)
c
Inspection/Replacement (page 2-1364)
b
Cleaning (page 2-1364)
d
Installation (page 2-1365)
INITIAL SETUP
Tools
Materials/Parts
Container, 6-gallon
Element, filter, hydraulic
Extension, 10-inch
Gasket, ring, hydraulic filter
Gloves, safety
Solvent, drycleaning (item 19, appendix C)
Goggles, safety
Tape, antiseizing (item 22, appendix C)
_
Gun, blow, air
Handle, ratchet, 1/2-inch drive
Personnel Required
Hose, air, assembly
Screwdriver, flat-tip, 3/16-inch
One
Socket, 5/8-inch, 1/2-inch drive
Wrench, open-end, 7/16-inch
References
LO 5-3805-254-12 (Lubrication Order)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Do not drain hydraulic oil when hot.
Hot oil can burn you.
1
Suction hose (1)
Valve (2)
Turn clockwise to close.
2-1362