TM 5-3805-254-20-2
SPEEDOMETER DRIVE CABLE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
24
. Extension (1)
Two clips (2), two
Screw in and tighten using two 7116-inch
screws (3), two new
box-end wrenches.
lockwashers (4), and
two nuts (5)
25
. Adapter (6) on
Speedometer drive
Put in.
auxiliary
cable (8)
Aline square end of drive tip (9) with
transmission (7)
square hole of adapter.
26
. Cable retainer
Holding adapter, screw on and tighten using
nut (10)
1-inch open-end wrench.
NOTE
FOLLOW-ON MAINTENANCE:
1.
Close lower center instrument panel (page 2-424).
2.
Close left side cab door (page 2-424).
3.
Close left side hood panel (page 2-424).
4.
Install air cleaner housing panel (page 2-452).
TASK ENDS HERE
2-1419
TA244594