TM-5-3805-254-20-2

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW, IHC MODEL F-5070 (CCE)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL VOLUME 2 OF 2

JANUARY 1988

TM-5-3805-254-20-2 - Page 828 of 971

TM 5-3805-254-20-2

ENGINE OIL PRESSURE GAGE LINE AND FITTINGS - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

ASSEMBLY

CAUTION

Antiseizing tape must be used on all pipe threads to provide a good seal and to prevent threaded parts

from seizing.

NOTE

For more information on how to use antiseizing tape, go to General Maintenance Instructions (page 2-

424).

37.

Straight pipe

Wrap pipe threads with antiseizing tape.

fitting (4)

38.

Bulkhead

Small nut (6)

Screw on and tighten using 1-inch and

fitting (5)

and large nut (7)

1 1/8-inch open-end wrenches.

39.

Straight pipe

Screw in and tighten using 7/16-inch and

fitting (4)

1-inch open-end wrenches.

40.

Large nut (7)

Unscrew and take off using 1-inch and

1 1/8-inch open-end wrenches.

41.

Straight pipe

T-fitting (8)

Screw on and tighten using 7/16-inch and

fitting (4)

9/16-inch open-end wrenches.

42.

90-degree elbow (9)

Wrap pipe threads with antiseizing tape.

and 45-degree

elbow (10)

2-1439

2-1439