TM-5-3805-254-34

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

MARCH 1993

TM-5-3805-254-34 - Page 299 of 727

TM 5-3805-254-34

6-37.

OUTPUT HOUSING REPAIR.

This Task Covers:

a.

Disassembly

c.

Assembly

b.

Cleaning and Inspection

Initial Setup:

Equipment Conditions:

Materials/Parts:

• Output housing removed (see paragraph 6-19).

• Hydraulic fluid (Item 7, Appendix

B)

• Transmission output shaft oil seal removed (see

• Grease

(item 10,

Appendix B)

paragraph 6-36).

• Sealing compound (Item 19, Appendix B)

• Dry cleaning solvent (Item 23, Appendix B)

• Governor assembly removed (see paragraph 6-35).

• Two seals

General Safety Instructions

:

Tools/Test Equipment:

• Dry cleaning solvent is flammable and must not be

• General mechanic's tool kit

used near open flame.

Use only in a well-ventilated

• Field automotive shop set

area.

• Bar and stud

• Spring compressor

a.

DISASSEMBLY

1.

Remove snapring (1) from output housing (3).

2.

Remove output shaft (2) and retaining ring (4).

TA703888

6-173