TM-5-3805-254-34

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

MARCH 1993

  TM-5-3805-254-34 - Page 386 of 727

TM 5-3805-254-34
9-4.
REAR AXLE POWER DIFFERENTIAL LOCK REPLACEMENT (Con’t).
b.
CLEANING AND INSPECTION I
WARNING
Dry cleaning solvent, P-D-680, is toxic and flammable.
Always wear protective goggles and
gloves, and use only In a well-ventilated area.
Avoid contact with skin, eyes, and clothes, and DO
NOT breathe vapors.
DO NOT use near open flame or excessive heat. The solvent’s flash point is
100°F-138°F (380C-590C).
If you become dizzy while using cleaning solvent, immediately get fresh
air and medical help.
If solvent contacts eyes, Immediately wash your eyes and get medical aid.
1.
Clean all metal parts with dry cleaning solvent, then dry thoroughly with clean, dry rags.
2.
Inspect control valve assembly, escutcheon, elbows, and pipe plug for cracks, breaks, or abnormal bends.
c.
INSTALLATION
1.
Install two elbows (3 and 6) and pipe plug (1) in rear axle power differential lock control valve assembly (2).
2.
Position rear axle power differential lock control valve assembly (2) and escutcheon (9) in place on left side
instrument panel (7) and secure with two screws (8).
FOLLOW-ON TASKS:
• Install instrument panel pad (see TM 5-3805-254-20).
TA703970
9-38


Back to Top