TM-5-3805-254-34

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

MARCH 1993

TM-5-3805-254-34 - Page 415 of 727

TM 5-3805-254-34

10-2.

AIR COMPRESSOR GOVERNOR REPLACEMENT.

This Task Covers:

Replacement

Initial Setup:

Equipment Conditions:

Materials/Parts:

• Air compressor governor to air dryer lines disconnected

• One gasket

and tagged, and fittings removed from air

• Two lockwashers

compressor governor (see TM 5-3805-254-20).

• Air compressor governor to wet air reservoir lines

Tools/Test Equipment:

disconnected and tagged, and fittings removed from

air compressor governor (see TM 5-3805-254-20).

• General mechanic's tool kit

REPLACEMENT

1.

Remove two screws (2), lockwashers (3), air compressor go(1), and casket (4) from air compressor (5) Discard

gasket and lockwashers.

2.

Install new gasket (4) and air compressor governor (1) on air compressor (5) with two new lockwashers (3) and

screws (2).

FOLLOW-ON TASKS:

• Install fittings and connect air compressor governor to air dryer lines to air compressor governor (see TM 5-3805-254-

20).

• Install fittings and connect air compressor governor to wet air reservoir lines to air compressor governor (see TM 5-3805-

254-20).

TA703997

10-7