TM 5-3805-254-34
11-1.
BRAKEDRUM REPAIR (Con’t).
b.
REPAIR
WARNING
DO NOT use a brakedrum that exceeds maximum wear specification.
Failure to follow this warning may
result In brake failure and serious Injury or death.
1.
Reface braking surface (6) of brakedrum (1) with
brakedrum lathe.
Remove a maximum of 0.01
in.
(0.25 mm) per cut.
2.
If inside diameter of brakedrum (1) now exceeds
maximum diameter marked on brakedrum,
discard brakedrum.
FOLLOW-ON TASKS:
• Install brakedrum (see TM 5-3805-254-20).
11-2.
TIRE REPAIR.
Refer to TM 9-2610-200-14 for instructions on tire repair.
TA704013
11-4