TM-5-3805-254-34

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

MARCH 1993

TM-5-3805-254-34 - Page 492 of 727

TM 5-3805-254-34

12-9.

STEERING WHEEL REPLACEMENT (Con’t).

c.

ALINEMENT

NOTE

•

Perform these procedures to center steering wheel with front wheels of vehicle.

•

Steering wheel must be Installed on steering shaft with alinement marks alined.

Do not attempt

to center steering wheel with frontwheels of vehicle by Installing steering wheel In any other

position on steering shaft.

1. Position front wheels of vehicle straight ahead.

2. Disconnect drag link (9) from steering arm (see paragraph 12-11).

3. Rotate steering wheel (1) until alinement mark (10) on end of steering gear output shaft (11) is perpendicular to

steering gear input shaft (8).

4. Remove yoke (7) from steering gear input shaft (8) (see paragraph 12-6).

5. Rotate steering wheel until centered.

TA704068

12-59