TM 5-3805-254-34
16-3.
POWER TAKE-OFF REPAIR.
This Task Covers:
a. Disassembly
c.
Assembly
b. Cleaning and Inspection
Initial Setup:
Equipment Conditions:
Materials/Parts:
* Power take-off removed (see paragraph 16-1).
• Hydraulic fluid (Item 7, Appendix B)
• Dry cleaning solvent (Item 23, Appendix B)
Tools/Test Equipment:
• One oil seal
• One repair kit
• General mechanic's tool kit
• Field automotive shop set* Two gaskets
References:
General Safety Instructions:
•·TM 9-214
• Dry cleaning solvent Is flammable and must not be
used near open flame.
Use only in a well-ventilated
area.
a.
DISASSEMBLY
1.
Remove retaining ring (1) and screw (3) from
housing (2).
2.
Remove setscrew (4) from housing (2).
TA704220
16-8