TM 5-3805-254-34
4-7.
RADIATOR FAN HUB REPAIR
"
This Task Covers:
a.
Disassembly
c. Assembly
b.
Cleaning and Inspection
Initial Setup:
Equipment Conditions:
Materials/Parts:
•
Fan hub removed (see TM 5-2815-241-34&P)
•
Grease (Item 10, Appendix B)
Tools/Test Equipment
:
•
Dry cleaning solvent (Item 23, Appendix B)
•
General mechanic's tool kit
•
One locknut
•
Field automotive shop set
•
One preformed packing
References:
•
One seal
•
TM 9-214
•
Three lockwashers
General Safety Instructions:
•
Dry cleaning solvent Is flammable and must not be used near open flame Use only in a well-ventilated area.
a.
DISASSEMBLY
1. Remove adjusting screw (1), washer (2), and
spacer (3) from fan support bracket (4).
2. Remove three screws (6), lockwashers (7),
washers (8), and shaft bracket (5) from fan
support to
TA703691
4-38