TM-5-3805-264-13-P

TRUCK, DUMP, HEAVY, BODY M917A1 AND M917A2

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2014

TM-5-3805-264-13-P - Page 276 of 660

REMOVAL

1.

Remove locking pin (Figure 1, Item 9) from adjustment tube (Figure 1, Item 3).

2.

Remove locknut (Figure 1, Item 6), screw (Figure 1, Item 5), and adjustment tube (Figure 1, Item 3) from

MCS gate (Figure 1, Item 7). Discard locknut.

3.

Remove locknut (Figure 1, Item 8), screw (Figure 1, Item 4), and upper tube (Figure 1, Item 2) from MCS

tailgate (Figure 1, Item 1). Discard locknut.

Figure 1.

Adjustment Tube Removal.

END OF TASK

INSTALLATION

1.

Install upper tube (Figure 2, Item 2) on MCS tailgate (Figure 2, Item 1) with screw (Figure 2, Item 4) and

new locknut (Figure 2, Item 8).

2.

Position adjustment tube (Figure 2, Item 3) over upper tube (Figure 2, Item 2). Install adjustment tube on

MCS gate (Figure 2, Item 7) with screw (Figure 2, Item 5) and new locknut (Figure 2, Item 6).

CAUTION

Outer passenger's and outer driver's side adjustment tube locking pins must be installed

with pin heads to outside. If incorrectly installed, ends of pins will protrude and become

bent. Failure to comply may result in damage to equipment.

3.

Install locking pin (Figure 2, Item 9) on adjustment tube (Figure 2, Item 3).

TM 5-3805-264-13&P

0045

0045-2