TM-5-3805-264-13-P
TRUCK, DUMP, HEAVY, BODY M917A1 AND M917A2
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JUNE 2014
TM-5-3805-264-13-P - Page 312 of 660
DISASSEMBLY - Continued
12.
Remove preformed packing (Figure 3, Item 5) from bottom end plate (Figure 3, Item 6). Discard preformed
packing.
13.
Remove cylinder sleeve (Figure 3, Item 7) from piston (Figure 3, Item 9).
14.
Remove nut (Figure 3, Item 10) from piston shaft (Figure 3, Item 4).
15.
Remove piston (Figure 3, Item 9) and metal washer (Figure 3, Item 2) halves from piston shaft
(Figure 3, Item 4).
NOTE
Note direction of gaskets during removal to aid in installation.
16.
Remove two plain seals (Figure 3, Item 1) and metal strip (Figure 3, Item 8) from piston (Figure 3, Item 9).
Discard plain seals and metal strip.
17.
Remove preformed packing (Figure 3, Item 3) from piston shaft (Figure 3, Item 4). Discard preformed
packing.
Figure 3.
Cylinder Piston.
END OF TASK
CLEANING AND INSPECTION
Clean and inspect components in accordance with General Maintenance Instructions (WP 0072).
END OF TASK
TM 5-3805-264-13&P
0051
0051-4
Back to Top
