TM-5-3805-264-13-P

TRUCK, DUMP, HEAVY, BODY M917A1 AND M917A2

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2014

TM-5-3805-264-13-P - Page 377 of 660

REMOVAL - Continued

4.

Tag and disconnect shift tower jumper harness power and ground connectors (Figure 2, Item 10) from cab

harness power and ground connectors (Figure 2, Item 9).

5.

Remove grommet (Figure 2, Item 8) and cab harness power and ground connectors (Figure 2, Item 9) from

shift tower (Figure 2, Item 11).

NOTE

To ease installation, note mounting position of cable pivot pins and hold-down clamps prior

to disconnecting cables.

6.

Place transmission selector lever in D (Down) position (TM 9-2320-363-10 or TM 9-2320-302-10).

7.

Tag transmission shift cable (Figure 2, Item 13).

8.

Remove two nuts (Figure 2, Item 7), washers (Figure 2, Item 6), screws (Figure 2, Item 3), clamp

(Figure 2, Item 5), and spacer (Figure 2, Item 4) from bracket (Figure 2, Item 12).

9.

Remove retaining pin (Figure 2, Item 1) from pivot pin (Figure 2, Item 2) and pivot pin from bracket

(Figure 2, Item 14).

Figure 2.

Transmission Shift Cable Disconnection.

TM 5-3805-264-13&P

0062

0062-3