TM-5-3805-264-13-P
TRUCK, DUMP, HEAVY, BODY M917A1 AND M917A2
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JUNE 2014
TM-5-3805-264-13-P - Page 389 of 660
FIELD MAINTENANCE
HYDRAULIC OIL FILTER ELEMENT REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
General Mechanic's Tool Kit
(WP 0113, Table 1, Item 12)
Cap Set, Protective, Dust and Moisture
(WP 0113, Table 1, Item 2)
Materials/Parts
Lubricating Oil (WP 0112, Table 1, Item 23)
Oil Filter Element (WP 0114, Table 1, Item 31)
O-Ring (WP 0114, Table 1, Item 7)
Wiping Rags (WP 0112, Table 1, Item 29)
References
WP 0072
WP 0073
Equipment Condition
Dump body raised and supported on body props
(WP 0005)
WARNING
•
NEVER work under a raised dump body unless it is secured in the raised position
with body props and dump body is EMPTY.
•
DO NOT disconnect hydraulic lines while engine is running. Engine must be shut
down and dump body fully lowered or supported on body props before lines are
disconnected. Escaping hydraulic fluid under pressure can penetrate the skin.
•
Failure to comply may result in personnel injury or death.
TM 5-3805-264-13&P
0063
0063-1
Back to Top
