TM-5-3805-264-13-P
TRUCK, DUMP, HEAVY, BODY M917A1 AND M917A2
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JUNE 2014
TM-5-3805-264-13-P - Page 491 of 660
EXPLANATION OF COLUMNS IN THE REPAIR PARTS LIST AND SPECIAL TOOLS LIST
WORK PACKAGES - Continued
XC
Installation drawings, diagrams, instruction sheets, field service drawings;
identified by manufacturer’s P/N.
XD
Item is not stocked. Order an "XD" coded item through local purchase or normal
supply channels using the CAGEC and P/N given, if no NSN is available.
NOTE
Cannibalization or controlled exchange, when authorized, may be used as a source of
supply for items with the above source codes, except for those items source coded "XA" or
those aircraft support items restricted by requirements of AR 750-1.
Maintenance Code.
Maintenance codes tell you the level(s) of maintenance authorized to use and repair support
items. The maintenance codes are entered in the third and fourth positions of the SMR code as follows:
Third Position.
The maintenance code entered in the third position tells you the lowest maintenance level
authorized to remove, replace, and use an item. The maintenance code entered in the third position will indicate
authorization to the following levels of maintenance:
Maintenance Code
Application/Explanation
C -
Crew maintenance can service, remove, replace, and use the item.
F -
Field maintenance can remove, replace, and use the item.
H -
Below Depot Sustainment maintenance can remove, replace, and use the item.
L -
Specialized Repair Activity (SRA) can remove, replace, and use the item.
K -
Contractor facility can remove, replace, and use the item.
Z -
Item is not authorized to be removed, replaced, or used at any maintenance level.
D -
Depot can remove, replace, and use the item.
TM 5-3805-264-13&P
0078
0078-3
Back to Top
