TM-5-3805-264-13-P
TRUCK, DUMP, HEAVY, BODY M917A1 AND M917A2
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JUNE 2014
TM-5-3805-264-13-P - Page 59 of 660
OPERATOR MAINTENANCE
DESCRIPTION AND USE OF OPERATOR'S CONTROLS AND INDICATORS
Table 1.
Console.
Figure 1.
Console.
Key
Control/Indicator
Function
1
Hydraulic Control
Lever
Raises and lowers dump body. Squeeze T-handle together and pull lever
back to UP position to raise dump body. Push lever forward to DOWN
position to lower dump body. Place in N (Neutral) detent position to stop
dump body movement. Lever will not operate to raise dump body if main light
switch is in blackout mode.
2
Material Control
System (MCS)
Control Unit
(M917A1 with MCS
and M917A2
with MCS)
Four toggle switches control LEFT, LEFT CENTER, RIGHT CENTER, and
RIGHT MCS gates. Move switch(es) forward to OPEN position and rearward
to CLOSE position.
3
MCS Indicator Light
(M917A1 with MCS
and M917A2
with MCS)
Red light indicates MCS has power.
TM 5-3805-264-13&P
0004
0004-1
Back to Top
