TM-5-3805-274-13-P
DUMP TRUCK BODY M917
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
AUGUST 2013
TM-5-3805-274-13-P - Page 120 of 364
REMOVAL
1.
Remove blind rivet (Figure 1, Item 2) and reflector light (Figure 1, Item 3) from right or left steel plate
(Figure 1, Item 4) above mud flap. Discard blind rivet (Figure 1, Item 2).
2.
Remove blind rivet (Figure 1, Item 2) and reflector light (Figure 1, Item 3) from upper right or left sides
of dump body bed (Figure 1, Item 1). Discard blind rivet (Figure 1, Item 2).
END OF TASK
INSTALLATION
1.
Install reflector light (Figure 1, Item 3) on upper right or left sides of dump body bed (Figure 1, Item 1)
with new blind rivet (Figure 1, Item 2).
2.
Install reflector light (Figure 1, Item 3) on right or left steel plate (Figure 1, Item 4) above mud flap with
new blind rivet (Figure 1, Item 2).
END OF TASK
END OF WORK PACKAGE
Figure 1. Reflector Light Removal and Installation.
3
2
4
1
TM 5-3805-274-13&P
0025
0025-2
Back to Top
