TM-5-3805-274-13-P
DUMP TRUCK BODY M917
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
AUGUST 2013
TM-5-3805-274-13-P - Page 244 of 364
Source Code
Application/Explanation
PA
Stock items; use the applicable NSN to requisition/request items with these source codes.
They are authorized to the level indicated by the code entered in the third position of the
SMR code.
NOTE
Items coded PC are subject to deterioration.
PB
PC
PD
PE
PF
PG
PH
PR
PZ
KD
Items with these codes are not to be requisitioned/requested individually. They are part of a
kit that is authorized to the maintenance level indicated in the third position of the SMR
code. The complete kit must be requisitioned and applied.
KF
KB
MF-Made at
field
Items with these codes are not to be requisitioned/requested individually. They must be
made from bulk material which is identified by the P/N in the DESCRIPTION AND
USABLE ON CODE (UOC) entry and listed in the bulk material group work package of
the RPSTL. If the item is authorized to you by the third position code of the SMR code,
but the source code indicates it is made at a higher level, order the item from the higher
level of maintenance.
MH-Made at
below
depot/sustainment
level
ML-Made at
SRA
MD-Made at
depot
MG-Navy only
AF-Assembled
by field
Items with these codes are not to be requested/requisitioned individually. The parts that
make up the assembled item must be requisitioned or fabricated and assembled at the level
of maintenance indicated by the source code. If the third position of the SMR code
authorizes you to replace the item, but the source code indicates the item is assembled at a
higher level, order the item from the higher level of maintenance.
AH-Assembled
by below depot
sustainment
level
AL-Assembled
by SRA
AD-Assembled
by depot
AG-Navy only
XA
Do not requisition an
″
XA
″
coded item. Order the next higher assembly.
(Refer to NOTE below.)
XB
If an item is not available from salvage, order it using CAGEC and P/N.
XC
Installation drawings, diagrams, instruction sheets, field service drawings; identified by
manufacturer’s P/N.
TM 5-3805-274-13&P
0052
0052-2
Back to Top
