TM-5-3895-371-24-P
BITUMINOUS DISTRIBUTOR BODY M918, MODEL D-63
TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL WITH REPAIR PARTS AND SPECIAL TOOLS LIST
MARCH 1981
TM-5-3895-371-24-P - Page 137 of 330
TM 5-3895-371-24&P
(2)
Replace ball bearings in carry arm assembly (4, fig. 2-58) as follows:
(a)
Remove hex nut (5), screw (1), and pin (6).
LEGEND:
1. SCREW
2. OUTER BEARING RACE
3. INNER BEARING RACE
4. CARRY ARM ASSEMBLY
5. HEX NUT
6. PIN
TA 075866
Figure 2-58.
Remove/Install Bearing Balls.
2-114
Back to Top
