TM-5-3895-371-24-P

BITUMINOUS DISTRIBUTOR BODY M918, MODEL D-63

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL WITH REPAIR PARTS AND SPECIAL TOOLS LIST

MARCH 1981

TM-5-3895-371-24-P - Page 267 of 330

TM 5-3895-371-24 & P

4-9. Remove Tool Box. (Refer to fig. 4-14.)

a.

Remove four capscrews (7), nuts, and washers in rear of box holding air tank to tool box and

pull air tank away.

b.

Remove three bolts, nuts, and washers (2) on each end of box and remove box from walk-

way (1).

c.

Drill out six pop rivets (8) holding latch arm (9) to lid (10).

d.

Drill out eight pop rivets (4) holding hinge to lid (10).

4-10. Install Tool Box.

a.

Install hinge to lid with eight new pop rivets (4).

b.

Install latch arm to lid (10) with six new pop rivets

(8).

c.

InstalI tool box to walkway (1) with three bolts, nuts and washers (2) on each end.

d.

tool box.

Install four capscrews (7), nuts, and washers, and secure air tank assembly to back side of

4-18