TM-5-3895-371-24P
BITUMINOUS DISTRIBUTOR BODY M918, MODEL D-63
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LISTS (INCLUDING DEPOT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LISTS)
DECEMBER 1992
TM-5-3895-371-24P - Page 9 of 247
TM 5-3895-371-24P
Code
Application/Explanation
PA
Stocked items; use the applicable NSN to
PB
request/requisition items with these source
PC**
codes.
They are authorized to the category
PD
indicated by the code entered in the 3d
position of the SMR code.
PE
PF
**
Items
coded
PC
are
subject
to
PG
deterioration.
Items with these codes are not to be
KD
requested/requisitioned
individually.
They
KF
are part of a kit which is authorized to the
KB
maintenance category indicated in the 3d
position of the SMR code.
The complete kit
must be requisitioned and applied.
MO-(Made at UMI
Items with these codes are not to
AVUM Level)
be
requested/requisitioned
MF-(Made at DS/
individually.
They must be made
AVUM Level)
from
bulk
material
which
is
MH-(Made at GS
identified by the part number in
Level
the DESCRIPTION AND USABLE
ON CODE (UOC) column and
ML-(Made at Spe-
listed in the Bulk Material group
cialized Repair
of the repair parts list in this
Activity (SRA))
RPSTL.
If the item is authorized
MD-(Made at
to you by the 3d position code of
Depot)
the SMR code, but the source
higher level, order the item from
code indicates it is made at a
the higher level of maintenance.
Items with these codes are not to
be
requested/requisitioned
AO-(Assembled by
individually.
The parts that make
UMI AVUM
up the assembled item must be
Level)
requisitioned or fabricated and
AF-(Assembled by
assembled at the level
of
DS/AVIM
maintenance indicted by the
Level)
source code.
If the 3d position
AH-(Assembled by
code
of
the
SMR
code
GS Category)
authorizes you to replace the
item,
but
the
source
code
AL-(Assembled by
indicates the item is assembled
SRA)
at a higher level, order the item
AD-(Assembled by
from
the
higher
level
of
Depot)
maintenance.
XA -
Do not requisition an "XA"-coded item.
Order its
next higher assembly.
(Also refer to the NOTE
following.)
XB -
If an "XB" item is not available from salvage,
order it using the CAGE and part number given.
XC-
Installation drawing, diagram, instruction sheet,
field service drawing, that is identified by the
manufacturer’s part number.
XD -
Item is not stocked.
Order an "XD"-coded item
through normal supply channels using the CAGE
and part number given, if no NSN is available.
NOTE
:
Cannibalization or controlled exchange,
when authorized, may be used as a source of supply
for items with the above source codes, except for
those source coded "XA" or those aircraft support
items restricted by requirements of AR 700-42.
(2)
Maintenance Code.
Maintenance codes tell you
the
level(s) of maintenance authorized to USE and
REPAIR support items.
The maintenance codes are
entered in the third and fourth positions of the SMR code
as follows:
(a)
The maintenance code entered in the third
position tells you the lowest maintenance level
authorized to remove, replace, and use an item.
The
maintenance code entered in the third position will indi-
cate authorization to one of the following levels of
maintenance.
Code
Application/Explanation
C -
Crew or operator maintenance done within
unit maintenance or aviation unit mainte-
nance.
O -
Unit maintenance or aviation unit category
can remove, replace, and use the item.
F -
Direct support or aviation intermediate level
can remove, replace, and use the item.
H -
General support level can remove, replace,
and use the item.
L -
Specialized repair activity can remove, re-
place, and use the item.
D -
Depot level can remove, replace, and use
the item.
(b)
The maintenance code entered in the
fourth position tells whether or not the item is to be re-
paired and identifies the lowest maintenance level with
the capability to do complete repair (i.e., perform all
authorized repair functions).
(NOTE: Some limited repair
may be done on the item at a lower level of maintenance,
if authorized by the Maintenance Alloca-tion Chart (MAC)
and SMR codes.) This position will contain one of the
following maintenance codes:
Code
Application/Explanation
O -
Unit maintenance or aviation unit is the low-
est level that can do complete repair of the
item.
F -
Direct support or aviation intermediate is the
lowest level than can do complete repair of
the item.
2
Back to Top
