TM-5-3895-372-20
CONCRETE-MOBILE MIXER BODY M919, MODEL 8CM-24/F
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL
AUGUST 1980
TM-5-3895-372-20 - Page 327 of 694
TM 5-3895-372-20
AGGREGATE SUPPLY SYSTEM.
7-13.
CONVEYOR BELT ADJUSTMENT (Continued).
LOCATION/ITEM
ACTION
REMARKS
A. ADJUSTMENT OF BELT.
1.
Two nuts (2).
Loosen.
One on each side of mixer.
2.
Two adjusting rods (1).
Tighten to 20 lb-ft (27 N-m).
B. EVEN TENSION CHECK
3.
Two brackets (3) and roller
Use ruler to measure distances
bearing cages (4).
between bracket and roller bear-
ing cage on each side.
If there is
more than 1/4 in.
(0.6 cm) differ-
ence between distances, loosen
bolts.
Readjust until distances
are within 1/4 in.
(0.6 cm) of
each other.
4.
Two nuts (2).
Tighten securely.
Hold adjust-
One nut (2) on each side of
ing rod (1) to prevent turning
mixer.
while tightening.
7-35
Back to Top
