TM-5-3895-372-20

CONCRETE-MOBILE MIXER BODY M919, MODEL 8CM-24/F

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL

AUGUST 1980

TM-5-3895-372-20 - Page 536 of 694

TM 5-3895-372-20

HYDRAULIC SYSTEM.

10-16.

HYDRAULIC MOTOR MAINTENANCE (Continued).

LOCATION/ITEM

ACTION

REMARKS

B. INSTALLATION (Continued).

17. Two nuts (23), flat washers

Install per illustration to

(22), flat washers (19), bolts

end plate (20).

(18) and four rubber

spacers (21).

18. Two hoses (6).

Install in hydraulic motor (8)

and tighten two hose fittings

(7).

19. Two swivel nuts (4).

Unplug two pipes (5) and

tighten two swivel nuts (4)

to two hoses (6).

20. Hose bracket (1).

Install with lockwasher (3)

and nut (2).

C. OPERATIONAL CHECK.

21. Mixer body.

Start up (see TM 9-2320-273-

10 and TM 53895372-10).

22. Auger.

Activate and check for leaks.

Tighten connections as neces-

sary.

NOTE

If auger is not rotating in correct direction, switch hose (6) connections.

23.Mixer body.

Shut down (see TM 9-2320-273-

Raise and latch auger.

10 and TM 53895-372-10).

10-66