TM-5-3895-372-20

CONCRETE-MOBILE MIXER BODY M919, MODEL 8CM-24/F

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL

AUGUST 1980

TM-5-3895-372-20 - Page 551 of 694

TM 5-3895-372-20

AIR SYSTEM.

11-8.

VIBRATOR MAINTENANCE AND REPLACEMENT (Continued)

LOCATION/ITEM

ACTION

REMARKS

B.

CLEANING AND LUBRICATION.

NOTE

The following procedure is for cleaning only.

Components are not available for service.

6. Four screws (7) and

Remove.

lockwashers (6).

7. Guard (5) (sand bin

Remove.

vibrators only).

8. End plate (4).

Remove.

If necessary, tap loose with

hammer.

9. Piston (8).

Add a drop of penetrating oil.

Piston located inside of

vibrator.

10. Piston (8).

Remove from vibrator (2).

11. Piston (8) and

Remove rust.

Use No.

320 emery paper.

vibrator (2).

12. Piston (8).

Oil piston with machine oil

and replace in vibrator (2).

13. End plate (4).

Install.

14. Guard (5).

Install.

15. Four screws (7)

Install and tighten.

and lockwashers (6).

11-14