TM-5-3895-372-20
CONCRETE-MOBILE MIXER BODY M919, MODEL 8CM-24/F
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL
AUGUST 1980
TM-5-3895-372-20 - Page 631 of 694
TM 5-3895-372-20
LAMPS AND WIRING.
13-11.
WIRE AND CABLE MAINTENANCE (Continued).
LOCATION/ITEM
ACTION
REMARKS
B.
OPERATIONAL CHECK.
Main lamp switch
Turn to ON position.
Check
lamps for operation.
Turn
OFF lamp switch.
NOTE
If lamps fail to light,
do the following steps:
a.
Replace bulb with new or known good bulb.
b.
Check wire connections.
Repair if necessary.
c.
Check lamp assemblies for corrosion or rust.
Repair or replace as necessary.
Refer to para 13-9 and 13-10.
d.
Check for power at lamp assembly.
e.
Use a voltmeter or 12-volt test lamp and check for power where body wire
splices into chassis harness.
13-20
Back to Top
