Table
1.
FIELD LEVEL PMCS - Continued
ITEM
NO.
INTERVAL
ITEM TO BE
CHECKED OR
SERVICED
PROCEDURE
EQUIPMENT
NOT READY/
AVAILABLE IF:
2
1
2
3
Figure 7.
Hand Pump Hydraulic System.
Check hydraulic cylinders (Figure 7, Item 2) for leaks,
sand, dirt, or debris.
Not mission capable if
leaks, sand, dirt, or debris
are present.
Check hydraulic tubing (Figure 7, Item 3) and hoses for
damage, kinks, and/or leaking
Any Class III leaks are
found.
8
Semi-
Annual
Rear Guide
Assembly
Check rear guide pad (Figure 8, Item 1) for excessive
wear, damage, or missing hardware. Replace wear pad
(Figure 8, Item 1) (WP
0045) if it is worn to within 1/16
inch (1.59 mm) of screw heads or if it is worn through,
exposing metal backing plate.
Wear pad is worn to within
1/16 inch (1.59 mm) of
screw heads or is worn
through.
TM 5-3990-263-13&P
0036
0036-6