TM-5-4210-249-13-P-1

TACTICAL FIRE FIGHTING TRUCK (TFF) MODEL M1142

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL WITH REPAIR PARTS AND SPECIAL TOOLS LIST (INCLUDING DEPOT REPAIR PARTS AND SPECIAL TOOLS); PART 1 OF 4

  TM-5-4210-249-13-P-1 - Page 734 of 1188

TM 5-4210-249-13&P-1
0104-26
DRAFT
0104
TFFT02859
WARNING
ICON 3
Remove rings, wristwatches, neck chains, and any other jewelry before working
around vehicle.
Jewelry can catch on equipment and cause serious injury.
Jewelry
and tools may short across electrical circuits and cause damage to equipment, or
severe burns or electrical shock to personnel.
Step 34.
While an assistant pushes bumper turret control pattern control switch to fog
position (WP 0035), check for 22 to 28 VDC between fog wire (black) at bumper turret
junction box 9-pin terminal strip, terminal 7 and a known good ground.
If 22 to 28 VDC are not present, go to Step 36.
Step 35.
Put bumper turret control POWER switch to
{
(off) position (WP 0035).
Turn battery
disconnect switch to OFF position (WP 0007).
Check connections at bumper turret
junction box 9-pin and 5-pin terminal strips for loose connections.
a.
If connections are loose, tighten loose connections (WP 0573).
b.
If connections are not loose, replace bumper turret junction box pattern
sleeve fog control valve (WP 0573).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION


Back to Top