TM 5-4210-249-13&P-2
0255-8
DRAFT
0255
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
29. Remove nut (83) and wire (84) from stud (85).
30. Remove line (86) from elbow (87).
31. Straighten cable wire (88).
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Care must be taken when removing cable wire from arm and bracket.
Wire is under
tension and must be held until safely repositioned.
Failure to comply may result in
injury to personnel.
32. Loosen screw (89) and remove retainer (90) from cable wire (88).
NOTE
Note position of cable on bracket prior to removal to ensure proper installation.
33. Remove two nuts (91), lockwashers (92), four washers (93), two screws (94), cushion clips (95), and
cable (96) from bracket (97).
Discard lockwashers.
NOTE
•
Number of washers may vary.
•
Note position of washers prior to removal to ensure proper installation.
34. Remove cable wire (88) from pin (98).
TFFT01992B
WARNING
ICON 72