TM 5-4210-249-13&P-2
0271-2
DRAFT
0271
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
2.
Turn valve handle (2) clockwise to closed position.
NOTE
•
Cover is attached to valve handle with adhesive.
•
Note position of cover prior to removal to ensure proper installation.
3.
Pry cover (3) from valve handle (2).
NOTE
•
Stop on valve handle is positioned between 90 degree indent on valve.
•
Note position of valve handle prior to removal to ensure proper installation.
4.
Remove locknut (4) and valve handle (2) from valve (5).
Discard locknut.
NOTE
•
Tag and mark hoses prior to removal to ensure proper installation.
•
Clamp may not be re-used.
5.
Remove clamp (6) and hose (7) from elbow (8).
6.
Remove hose (9) from elbow (10).
7.
Remove two screws (11), washers (12), and valve (5) from bracket (13).
8.
Remove elbow (14) from elbow (10).
9.
Remove two elbows (8) and (10) from valve (5).
END OF TASK
TFFT00841