TM 5-4210-249-13&P-2
0168-13
DRAFT
0168
TFFT04289
Step 22.
Install fuse FS 19 (WP 0401).
Remove relay 14 (WP 0402).
Remove one rear lower
center clearance light (WP 0342).
With a test lead set, check for continuity across wire
1606 (green) from cab power distribution block relay 14 connector, terminal 5 to rear
lower center clearance light connector terminal.
If there is no continuity, go to Step 27.
Step 23.
With a test lead set, check for continuity across wire 1640 (black) from cab power
distribution block relay 14 connector, terminal 2 to a known good ground.
If there is no continuity, replace cab power distribution wire harness and
block (WP 0441).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION