TM 5-4210-249-13&P-2
0173-17
DRAFT
0173
TFFT4669
Step 26.
Turn battery disconnect switch to OFF position (WP 0007).
Remove SINCGARS
receiver transmitter and power adapter from electronic mounting base
(TM 11-5820-890-10).
Disconnect SINCGARS radio interface wire harness connectors
from electronic mounting base and intercom (WP 0462).
With a lead test set, check for
continuity across SINCGARS radio interface wire harness PTT Lo wire (red) from
intercom connector, terminal 4 to SINCGARS radio connector, terminal A.
If there is no continuity, repair PTT Lo wire if repairable
(TM 9-2320-325-14&P), or replace SINCGARS radio interface wire harness
(WP 0462).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION