TM 5-4210-249-13&P-2
0186-17
DRAFT
0186
27
During
Gauges
Inspect gauges for visible damage.
Check that all
segments of water tank and foam tank level gauges
illuminate when tanks are full.
Any gauge is
damaged or
inoperable.
28
During
Gauges,
Indicators, and
Warning Lights
TFFT00202P
NOTE
During operation, all gauges should maintain proper readings.
a.
Start water pump engine (WP 0022).
b.
Monitor all gauges, indicators, and warning
lights for proper reading while operating
vehicle.
c.
Check the following gauges for proper
operation:
1.
OIL PRESSURE
- Minimum oil pressure
with engine warm and low idle speed is
12 psi (83 kPa).
2.
ENGINE TEMP
- Operating range is 181
to 203ºF (83 to 95ºC).
3.
VOLTAGE
- 24-volt.
4.
FUEL GAUGE
5.
ENGINE RPM
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Table 1. Preventive Maintenance Checks and Services. (Continued)
Item
No.
Interval
Item To Inspect
Or Service
Crewmember Procedure
Not Fully Mission
Capable if: