TM-5-4210-249-13-P-2

TACTICAL FIRE FIGHTING TRUCK (TFF) MODEL M1142

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL WITH REPAIR PARTS AND SPECIAL TOOLS LIST (INCLUDING DEPOT REPAIR PARTS AND SPECIAL TOOLS); PART 2 OF 4

TM-5-4210-249-13-P-2 - Page 868 of 1452

TM 5-4210-249-13&P-2

0187-8

DRAFT

0187

c.

Torquing.

(1)

Tighten bolts, screws, washers, hoses, and fittings as required in WP 0609 or in each

maintenance task.

(2)

Apply a small amount of colored sealing compound to connection to mark torque point.

d.

Identification Tags.

Put hoses, tubes, lines, and electrical wiring in place by matching identification tags and markings on

equipment.

e.

Hoses, Air Lines, and Wiring.

After installing hoses, air lines, and wiring, ensure that they do not contact moving parts or component edges.

Secure in place, out of way, with cable ties and cushion clips.

f.

Hose and Fitting Tightening Procedures.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

Tighten hoses and fittings as required in WP 0609 or in each maintenance task.

If a

torque wrench and crowsfoot are not available or cannot be used, use the following

procedure.

1.

Install hose (1) on fitting (2).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

TFFT04155